Your submission was sent successfully! Close

Thank you for contacting us. A member of our team will be in touch shortly. Close

You have successfully unsubscribed! Close

Thank you for signing up for our newsletter!
In these regular emails you will find the latest updates about Ubuntu and upcoming events where you can meet our team.Close

Gathering Modem Information

If we have a modem in the system, we should be able to see it with mmcli -L, for instance:

$ sudo mmcli -L
Found 1 modems:
    /org/freedesktop/ModemManager1/Modem/0 [BRAND] MODEL

The command shows the DBus path for the modem, with the number at the end of the path being the argument to access it from the cli:

$ sudo mmcli -m 0

/org/freedesktop/ModemManager1/Modem/0 (device id '817f7e2b3c6dfdf1d4ee7f4c4ecc34de61bc5de9')
  -------------------------
  Hardware |   manufacturer: 'BRAND'
           |          model: 'MODEL'
           |       revision: 'FW.REVISION'
           |      supported: 'gsm-umts'
           |        current: 'gsm-umts'
           |   equipment id: '988037034540195'
  -------------------------
  System   |         device: '/sys/devices/pci0000:00/0000:00:01.2/usb1/1-1'
           |        drivers: 'option1'
           |         plugin: 'generic'
           |   primary port: 'ttyUSB3'
           |          ports: 'ttyUSB0 (qcdm), ttyUSB1 (at), ttyUSB3 (at)'
  -------------------------
  Numbers  |           own : 'unknown'
  -------------------------
  Status   |           lock: 'none'
           | unlock retries: 'sim-pin (3), sim-puk (10)'
           |          state: 'disabled'
           |    power state: 'on'
           |    access tech: 'unknown'
           | signal quality: '0' (cached)
  -------------------------
  Modes    |      supported: 'allowed: 2g; preferred: none
           |                  allowed: 3g; preferred: none
           |                  allowed: 2g, 3g; preferred: none
           |                  allowed: 2g, 3g; preferred: 2g
           |                  allowed: 2g, 3g; preferred: 3g'
           |        current: 'allowed: any; preferred: none'
  -------------------------
  Bands    |      supported: 'unknown'
           |        current: 'unknown'
  -------------------------
  IP       |      supported: 'none'
  -------------------------
  3GPP     |           imei: '988037034540195'
           |  enabled locks: 'none'
           |    operator id: 'unknown'
           |  operator name: 'unknown'
           |   subscription: 'unknown'
           |   registration: 'unknown'
  -------------------------
  SIM      |           path: '/org/freedesktop/ModemManager1/SIM/0'

  -------------------------
  Bearers  |          paths: 'none'

This shows quite a bit of information: model, ports, status and so on. There is an unlocked SIM card, but no bearer defined. Again, we use the last number in the SIM path to access the SIM information:

$ sudo mmcli -i 0
SIM '/org/freedesktop/ModemManager1/SIM/0'
  -------------------------
  Properties |          imsi : '123450030477777'
             |            id : '9876075782002298987'
             |   operator id : '21477'
             | operator name : 'my-oper'

As can be seen, status is initially ‘disabled’. To power on the modem we can do:

$ sudo mmcli -m 0 --enable --timeout=120
successfully enabled the modem

After this, the registration status should change:

$ sudo mmcli -m 0
...
  -------------------------
  Status   |           lock: 'none'
           | unlock retries: 'sim-pin (3), sim-puk (10)'
           |          state: 'registered'
           |    power state: 'on'
           |    access tech: 'umts'
           | signal quality: '32' (recent)
  -------------------------
...

This page was last modified 29 days ago. Help improve this document in the forum.